Learn to make a Green Scapular Step-by-Step
Assemble your materials on a clean work surface:
Sharp Scissors, Ruler, Iron - no steam.
Green Felt or Wool, green cord, Scapular Images.
Set Iron to wool setting, no steam.
Iron full length of cord and green felt squares.
Most Kits come with pre-cut squares.
If you are working with bulk cloth, cut squares with pinking shears measuring 1 1/2 x 2 inches.
Cut cord for each scapular, 1 1/4 inches.
Fold cord in half, slightly offset center to form a tab as shown.
Position the tab under the center of the iron-on face of the scapular. Iron in place.
Do not move iron back and forth over iron-on patch.
Hold iron steady in place while praying:
Immaculate Heart of Mary, pray for us now and at the hour of our death. Amen.
This is just enough time for the heat of the iron to melt the adhesive of the patch to the fabric. If white adhesive melts onto felt on the outside edges of the patch, the iron is too hot. Adjust accordingly.
Repeat the same process for the reverse side of the scapular. The tab is placed under the image of the Virgin Mary. No tab is used on the reverse.
With sharp scissors, trim away any stray threads.
Congratulations!
Thank you
for becoming a Scapular Maker
for Our Lady!
> > > + < < <
We offer a Kit to make 10 Green Scapulars, and other Beginner Kits
on our store.
CLICK TO VISIT ROSARYMAKERSGUIDE WEBSTORE